"

皇冠体育在线—专为体育打造!拥有全球最顶尖的原生APP,每天为您提供千场精彩体育赛事,皇冠体育在线—专为体育打造!更有真人、彩票、电子老虎机、真人电子竞技游戏等多种娱乐方式选择,皇冠体育在线—专为体育打造!让您尽享娱乐、赛事投注等,且无后顾之忧!

"
ZHEJIANG JINGDUN TECHNOLOGY CO.,LTD.
Search After-sale support 400-1810-880

JD400W Slant Bed CNC Lathe Machine(Heavy Cutting Line Rail)

JD400W Slant Bed CNC Lathe Machine(Heavy Cutting Line Rail) is a high-speed, high-precision, high-reliability NC lathe. Castings are cast iron with resin sand technology. After high temperature aging treatment, the permanent stability of the machine tool is guaranteed. The guide rail adopts a 35-degree inclination angle, which greatly improves the rigidity of the machine tool. The rail can be re-machined by using Taiwan roller linear guide rail. Equipped with 12-position servo turret and hydraulic tailstock, it can process products and shafts required by multi-position cutters at one time. Selection of power turret can integrate turning, milling, drilling, boring, tapping and other functions of complex processing. It can not only ensure accuracy but also improve efficiency and reduce costs.
This machine has beautiful shape and humanized design.

Main technical parameters

Parameter table
Swing over bed mm Φ420
Maximum Machining Diameter mm Φ380
Maximum Z-direction travel mm 550
Maximum Machining Shaft Length (chuck + tailstock) mm 450within
Maximum X-direction travel mm 245(Radius value)
Fast moving speed m/min X:24 Z:24
Diameter of spindle through hole mm Φ62
Φ200Nose end form of spindle unit A2-6
Hollow hydraulic rotary cylinder 852(Bar within 52 of Ketong)
Spindle motor power kw 7.5 Servo Motor (optional 9 or 11)
Spindle speed rpm 5000
Section area of cutter rod mm 25*25(Optional 20*20)
Torque of X-and Z-direction motors nm 10NB 10N
Connection modes of X-and Z-direction motors Direct connection
Specifications of X-and Z-direction screw rods X:3210 Z:4010
Specification of X-and Z-Direction Ball Line Track (Selected Rollers) X:35 Z:35
Maximum stroke of tailstock sleeve mm 100
Taper of tailstock quill mt NO.4(Optional matchingNO.5)
Repeated positioning accuracy mm 0.002
Positioning Accuracy (Machine Tool Accuracy) mm 0.01
Chuck specification mm Φ200(8 inches) (10 inches)
Cooling water pump power W 450High pressure centrifugal pump
Machine tool weight kg ≈3000
Machine tool shape size (length * width * height) mm ≈2300*1620*1780(No chip removal machine)

Main configuration

Main configuration
Taiwan's new 21TA bus system (or Beijing KND system)
Anchuan Drive and Motor (Screw Drive)
Resin Sand Castings (Domestic)
Taiwan spindle (sleeve type)
Taiwan screw rod
Automatic Lubrication System (Domestic)
Special Bearing for Screw Rod (NTN or NSK)
Linear guideway (Taiwan)
8-inch hydraulic hollow three-jaw chuck (Taiwan)
8-Position servo turret (Taiwan)
Servo main motor
Main electrical components (Schneider)
Hydraulic tailstock
Automatic chip remover
Can be selected according to user's needs

Partial display

Recommended selection

STRENGTH DISPLAY

Back Top
皇冠体育在线—专为体育打造!